Thread: Cam degreeing
View Single Post
  #37  
Old 06-06-2008, 12:44 PM
grandville455's Avatar
grandville455 grandville455 is offline
Ultimate Warrior
 
Join Date: Jan 2003
Location: Chippewa Falls,WI 54729
Posts: 10,862
Default

We'll talked to bullet and he said to have it at 102... cause of the weight gearing etc.. so i will check it tonight and if its the same i will use my 2 degree offset key and retard it the 4 degrees needed to bring it in at 102....Granted i havent officially degreed it but this has to be damn close doing it this way too....Worse case senario it slows down right!?

__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,[email protected]@117.74


2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected]
M/T 275/60 ET SS Drag Radial

2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's