Like I said, I think it'll perform great, and the quality overall seems very high. The casting voids are minor, and the welding void isn't terrible, just a little less than what I'd expect. What really surprised me was what appeared to be a lazy approach to use an incorrect bolt with an extra washer and have no explanation or concern when asked about it. I'm going to replace the bolt with the correct size myself. Seems as though they would have done that before shipping. It's not accidental - the extra lock washer was deliberately put on there because of the longer shaft to make it fit. Problem is (though it really has no effect actually) that the extra lock washer obviously screws up the torque spec on the rear cover. Really dumb in my opinion when it's a soft bolt that probably costs 10 cents.
|