Definately, The 2801 cam will work fine, I like the Comp Xe series in real low comp engines especially smaller cubes like 400's IMHO i'd use the Comp XE268H cam and 1.5 Full Roller rockers, 68-72 Iron Intake, seen one today for cheap, but 73+ will work Ok, A Q-jet from 67cruiser for around 325$ is Very hard to beat and he builds a very good carb, Exhaust if you can add some oversized Ram air manifolds from PY or RARE or Headers , Upgrade to an HEI or Pertronix, New Tune Up parts and Go, probably get around 325-340hp on the cheap and be good on Fuel with the Q, Please Don't use a E-carb!
__________________
D.S.R.E. Your NW Pontiac Street/Strip Engine Builder, Specializing in Cylinder Head,Intake Manifold,and Exhaust Manifold Porting services and Building the Most Efficient stock rebuilds to Hi HP Pump Gas and Race Combinations for Pontiac,Buicks,Olds,FE Fords,385 Series and HP Gen 3 and 4 LS engines!
2006 silvy Z71 4X4,383 LS 600+hp NA
Shared Toy-66 Lemans 470cid by me 537hp 580tq-manifolds, 570hp 590tq-2"headers,custom cam,rpm intake, mild e-heads, Looks stock ;-}
|