View Single Post
  #8  
Old 09-06-2008, 04:45 PM
mike nixon mike nixon is offline
Moderator
 
Join Date: Dec 1999
Location: PORTLAND,IN,47371
Posts: 12,322
Default

Very rarely will a cam lobe affect compression unless the cyl is being washed with fuel.

I'd suspect a burnt / corroded valve or seat or broken valve spring, or stuck rings, before a bad cam.


If it's rings dump rislone in it and drive it, they may free up.

Valve springs can be changed on the car.


Before you go digging too deep be sure the ignition is firing correctly on that cyl as an ign miss can wash the cyl down with fuel and lower compression.


The 396/402 was one of the best v-8's chevy built.

Mike


Mike

__________________
so many pontiacs, so little time..................


moderator is a glorified word for an unappreciated prick..................


"Only two things are infinite, the universe and human stupidity, and I'm not sure about the
former." --Albert Einstein



"There is no such thing as a good tax."

"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."

- Winston Churchill