Quote:
Originally Posted by Tom Vaught
I used to use a "pinch" of BonAmi in each spark plug hole so I would say that a 1/2 of a teaspoon total shared between the 8 cylinders would be about right. Also your method would probably put less into each cylinder as you did it over time. My only thought was that it might "gum up" when it makes contact with the carb fuel and stick somewhere in the intake manifold vs get to the bores.
With my method you know at least the pinch reached each bore evenly.
Good Job!!
Tom V.
|
I really wanted to use your method as I thought it would work better but because of clearance issues I couldn't get to some of the spark plug holes very well. I think direct into the hole is a better method though. When you do it through the carb small amounts get stuck on the boosters, etc. I used carb cleaner to wash it down and get any remaining amounts into the engine.