Quote:
Originally Posted by Tinindian6702
Thanks, I am trying to get this done today. I just changed rear axles on my 8.2 inch 10 bolt on my 67 Firebird Convertible. . I have both axles bolted in. I have the gears inside the differential on the end of both axles. I cant get the smaller gears that are held in by the big pin inserted?? Is there a trick to getting these gears and their washers in place??? Please let me know.
Thanks.
|
I'll stand to be corrected, but if the 8.2 is anything like the 8.5 and 12 bolt, the side gears and spacers go in before the axles are inserted.
Stewart
__________________
1976 TA, nose converted to 1970 style, 406, ported #13 Heads, '70 iron intake without crossovers, Q-Jet - Cliff style, RARE OS manifolds, Pypes duals w/crossflow, UD 230/238 custom HR 4/7 swap cam with solid roller lifters  , Hydro-Boost 4-wheel discs, 4 Speed, 3.23 posi.
“Nothing in life is so exhilarating as to be shot at without result.” - Winston Churchill
|