Shims or chain?
On my 77 Bird, on the drivers side one of the header pipes hits the lower A-frame when stepping on the gas. I bent the pipe a little but still sometime contact occurs. The way I look at it I have two choices, chain the motor on the left so it wont lift, or put some shims under the motor mount.
Any comments on this?
__________________
Can do the talk, can't do the walk......therefore need deep pockets 
Injection is nice but I rather be blown 
If you got it flaunt it, if not fake it (Snoopy)
Original 1977 Firebird / Welded tube frame connectors
TH350 with shift kit / 400 bored/stroked to 455 by PDude
OCD=Waxing and polishing your oil filter
SICK=wetsanding your exhaust pipe
|