Thread: Quarter panels almost done!
View Single Post
  #7  
Old 10-30-2008, 04:28 AM
nh68gto's Avatar
nh68gto nh68gto is offline
Ultimate Warrior
  
Join Date: Jun 2005
Location: Hudson , NH
Posts: 1,665
Default
Jeremy I used a map gas torch and a scraper and the stuff comes right off.

It doesn't need to get very hot either so you won't even come close to doing
any damage with the heat to the metal.

__________________
Send it! It’s going home on a trailer.
Reply With QuoteReply With Quote