Quote:
Originally Posted by quicksilver97ta
How can you tell if you have one with the new bonding process vs. the old bonding process?
|
Email from Jim,
On the back face of the damper is a date stamp. I can't' remember exactly how it is presented but if it is all numbers, then it is the older version before we changed the bonding procedure and you will need to send it back and I will send you a new one. If the date code is numbers and letters (or maybe just one letter) then it is the later version with the improved bonding.
Regards - Jim Davis
__________________
69 400 Block, .030 over, KRE eagle stroker kt, KRE,CNC ported e-heads 310 cfm, port match RPM , comp roller 236/ [email protected] 586/600 lift 110 LS. 1.5 HS roller rockers, 350 Transmission, Red Neck tight 3500 stall converter, Ford 9” with 3.75’s, Strange center section, Moser 31spline axels, 29”Mt slicks, HRPARTSNSTUff anti roll system, Doug’s Headers 3.5” collectors, 22”Dynomax mufflers w/ H-pipe, Cliffs Q-jet, Fuel cell with sumps, Mallory 140 fuel pump and filter. Denny’s 3.5” drive shaft.
|