Quote:
Originally Posted by Probird
Does the 3" main crank have an advantage over the 3.25" in the oiling department at high rpm's? I don't remember for sure but it had something to do with the oil hole location or passages or something was different limiting rpm on the 3.25" main crank. I dunno, just something I remember being told in the past.
|
I believe all 3.25'' cranks were cross drilled, all 3'' were not.
__________________
Derek B.
Current best: 11.97@110 1.65-60' !!!
'74 ventura,  (Fired july 14/06) '74 462 4-bolt (9.5-1), SCAT, Ross, T-II w/850DP (shaker455), TH350, Conti 10'' 3800, Supercomps, Magnaflow, 3'' Pypes, 3.73's, 28x13.5-15 ET streets.
1970 Beismeyer 17' flatbottom vdrive, 11.8:1 455P, ported heads, dual Qjet tunnel ram.
|