"I hope you get better life out of your MT Radials than I do - about 4 trips to the track and mine are done."
Ours don't do much better. About 40 runs the wear grooves are gone, then they really start to work well, for about 30-40 more runs, then the cords start showing.
They require WAY too much burnout for my liking. I ran a set of MT ET Street bias ply tires with tubes for 4 seasons, and got them used! They required little if any burnout at all.
The only advantage I see with the radials is that they are much more stable on the top end of the track, same 60' times.
I've heard good things about the Hoosier's, thinking of trying them next season. They also have full 10" of tread with an 11" sidewall, which will be great for the stock 7" rims that we use......Cliff
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
|