Quote:
Originally Posted by b-man
Thanks Andrew.
Which O2 sensors and bungs did you end up using? Since you're using the same headers I'm using can you tell me about how close to the collector flange your O2 sensor bungs were installed and at what orientation/angle?
Thanks again, Bart
|
My GMPP harness kit came with the O2 sensors. I am really not sure which ones they are, but I suspect they are from the new Corvette, since I have the LS7 harness kit. I have the bungs welded about 4 inches behind the header collectors, with the wires going between the transmission and the exhaust pipes. The tips of the O2 sensors point down slightly to keep condensation from collecting in the sensor. Like this:
O/----[transmission]----\O
Does that make sense?
Andrew