Ok This is it Made by ATD My Shop has been Beating on it for about 4 1/2-5 Years Works Great The Head Unit Rachets so you get a tight fit on just about any pan Even Front drivers, Also Goes from Waist high so from Bench to Jack is easy with trans and it Goes Higher Than I ever need Even with My Hoist all the Way up, Ive have Maxed out the Weight Several Times, Anyways a Little Pricier than i remember But well worth it as They seem just about Indestructable FWIW! http://www.sjdiscounttools.com/atd-7430.html
__________________
D.S.R.E. Your NW Pontiac Street/Strip Engine Builder, Specializing in Cylinder Head,Intake Manifold,and Exhaust Manifold Porting services and Building the Most Efficient stock rebuilds to Hi HP Pump Gas and Race Combinations for Pontiac,Buicks,Olds,FE Fords,385 Series and HP Gen 3 and 4 LS engines!
2006 silvy Z71 4X4,383 LS 600+hp NA
Shared Toy-66 Lemans 470cid by me 537hp 580tq-manifolds, 570hp 590tq-2"headers,custom cam,rpm intake, mild e-heads, Looks stock ;-}
|