View Single Post
  #4  
Old 01-20-2009, 08:04 PM
steve's Avatar
steve steve is offline
Ultimate Warrior
 
Join Date: Jan 2006
Location: Philadelphia PA
Posts: 4,977
Default

Quote:
Originally Posted by x-bird2 View Post
two separate pieces, the vertical chrome and the horizontal drip rail. if you've gotten the seal out of the channel, and the channel piece off, make sure the chrome is cleaned off and not hiding any rivets or screws up in the corner before you attempt to pry it off. with the optional decor package, there are 3 pieces, the seal, the channel frame and the chrome. if you have access to a heat gun, use that, or use a hair dryer and get it nice and hot to soften up the sealer, if that's what's there.
thanks a lot man...i really need to get this stuff off. the car had a vinyl top and there are fragments stuck under the chrome piece. i should get a chance to get at it this weekend. the car has a two piece set-up. the horizontal piece came off easy and was two metal pieces. the other hunk seems to have a bunch of sealer holding it on. the heat gun is a perfect idea.

__________________
1981 Trans Am project -YJ 400 stroked to 488 CID-74cc Eheads-10.95:1-Northwind Intake-Holley Terminator-TH400-3:55 Moser rear-Dougs Headers....