I am replacing my core support bushings. I removed the bushings that were in there. I'm certain they were replaced about 8-9 years ago so they are not the originals. But I have the Energy Suspension kit, and after setting the new ones in. There is quite a bit of difference in height. See my pic.
It's not yet tightened, I just set the parts in and lowered the core support off the jack. They are loose in there...
The old one is in the pic.
Any comments?
__________________
--
James
Work
'67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake."
'75 Formula 400 - Daily Driver -
Running with my Home Built
455 and
TH400
Details here:
http://forums.maxperformanceinc.com/...d.php?t=588372