Well we fired it up on friday afternoon and cleaned the whole area where the oil was leaking. Apparently it is leaking from a pressure tap type plug halfway under the head surface. I looked at another block and its a 1/4 inch square plug, similar to the one on our motors by the distributor. Its not a really bad leak, so we cleaned it again with brakleen and filled it in with rtv. Not a permanent fix but at least it will drive into the garage instead of pushing it. Now we'll just have to find some time to take the head off. Thanks again!
__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09
|