Quote:
Originally Posted by HWYSTR455
I just went through this debate myself not too long ago, and was going to switch from a RPM to a victor, mainly street driven 461. The difference is only a few HP from what I understand, and it's above 4500 rpm, which I didn't feel was enough to warrant the swap. Either will work fine with that combo, and as Steve25 said, may be a paranoia issue with the builder, and when running polished runners. If there is any type of a wash problem, you can correct it pretty much with a turtle. Run what you have, and correct what needs to be corrected after identifying it....
...
|
Yep......I agree.......I only briefly considered the Victor after understanding where in the RPM range the Victor is beneficial......will know more next week when we go to the dyno.........but it'll be between a '71 HO intake and a Torker II