View Single Post
  #3  
Old 05-03-2009, 10:42 PM
Jimbro727's Avatar
Jimbro727 Jimbro727 is offline
Senior Chief
 
Join Date: Jun 2006
Location: Huntington, NY
Posts: 444
Send a message via AIM to Jimbro727
Default

Quote:
Originally Posted by 67drake View Post
Since it seems you have been screwing around with this for a long time now,I'm sure you have tried this,but I have to ask since I didn't see you mention it.
Have you tried to adjust the rear brakes up tighter? If the rear drums are too far out of adjustment,it will have the same symptoms.
Just checking.
Hey thanks for the reply-

I have done this a few times as I've chased this problem around - but I haven't done it recently, so I'll give it a shot.

How much would you tighten them? I've read all different ways to know when they're set. I think the method I used last was to tighten them until they drag, then back it off a little.

__________________
http://www.SheepdogRadio.com

---CARS---
1978 Pontiac Firebird T/A - Martinique blue/blue interior - 400 bored .030 over and stroked with an Eagle kit to 458, SRP forged pistons, Eagle crank, 6x heads, comp cams springs, comp cams hydraulic flat tappet cam, TH-350, and a Jeff Walker Q-Jet.



http://www.cardomain.com/ride/2982177