View Single Post
  #6  
Old 06-01-2009, 11:35 AM
toddmoll's Avatar
toddmoll toddmoll is offline
Senior Member
 
Join Date: Feb 2002
Location: Northern Arizona
Posts: 244
Default

Larry, is the steering box a stock ratio box? And is the flow control valve in the pump the correct (low pressure) one for the box? I changed my 66 to a quick ratio box and with the required high pressure control valve in my pump I get a chirping squeal when the box hits the locks at full travel. I put the low pressure valve back in as a test just to see what would happen and could hold the wheel on the lock at full travel with no squeal. This is normal for the high pressure so I learned to live with the noise on those occasions where I need to make tight turns.

Todd.