Charles the thick washers are 6mm or 1/4 " thick. I have no idea on the other two washers that go at the back of the shifter on their thickness. i used two regular steel washers there. The washers are in the assembly manual a total of 6 washers are shown in drawing # 9778563 section 35D page 361. If my camera was not acting up i would furnish a picture of the washers. The Le Mans floor shifter does not have the thinner washers at rear of shifter . The Dual Gate or His/Hers shows only has these extra two washers.
__________________
Scott
If you always do what you always did 
You always get what you always got  
Last edited by kate`s67gto; 06-28-2009 at 10:15 AM.
|