Quote:
Originally Posted by tom s
Lynn,will current RA V intakes and exhaust bolt up without any mods?Tom
|
Yes Tom. If you will look at the pictures of the top showing the castings with the intake flange, you will notice that they are extended. This is done to compensate for the 5/8 inch we raised the ports to accept the stock intakes. However the intake ports are smaller, so you will have to port match. This will be done one of two ways. We plan to offer a CNC to match to the stock port size. Alternatively, you can epoxy up the stock flange to meet the new smaller intakes.
Lynn