Quote:
Originally Posted by TreySmith
Is there any guides that show exactly what parts are used? Can I use my 6x heads and what needs to be done to them? Just take them to a machine shop and ask for ____?
I keep forgetting the way Pontiac Engines work, 450-500rwtq should be plenty for a street car to get to highschool and back and it shouldn't cost an arm and a leg right? I mean that's only like 150rwtq over stock.
|
Purchase this book, (How To Build Max Performance Pontiac V-8's, by Jim Hand) and it will tell you all you need to know about building a performance Pontiac motor you are looking for. Also in the back of the book are proven engine builds with specs from Pontiac engine builders, who some frequent this site.
http://www.amazon.com/How-Build-Perf.../dp/1884089674
It is a very good book that all Pontiac enthusiast should have. It shows what parts to use and how to modify and tune, etc.
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|