Paul,car looks NICE.
Thanks for pics
IF you can,would you get me some measurements?
center to center on these please.
rear pipe(exit) of mufflers at hangers
inlet to mufflers(pipe)
inlet to X at crossmember(pipe)
Mine looks like it should be 24 inches CtoC at exit of mufflers
but when assembled is 26.5 inches
inlet to mufflers is 14.25
This difference could be made up by cutting some off the pipes coming out of the X,which would move mufflers and tailpipes closer together,and straighten up the tailpipes in relationship to the frame and 1/4. Ive tried rotating the tailpipe but it never gets straight with frame and 1/4.
|