I've run trans fluid thru it mixed with PB Blaster, That's worked well for me in the past. I've been under it with Large prybars on the flywheel, broke The longest 1/2" breaker bar that Snap On makes on the balancer bolt trying to get this one loose. It's stuck tight!
I pulled a Valve cover on it yesterday to see the condition of the engine internally and it's CLEAN. Oil is clean and no metal shavings on the stick. It was obviously well cared for during it's previous life and IME those are the ones that stick the tightest, so to avoid more carnage than has already been done I'm just going to pull it and preform and autopsy.
Mike
__________________
so many pontiacs, so little time..................
moderator is a glorified word for an unappreciated prick..................
"Only two things are infinite, the universe and human stupidity, and I'm not sure about the
former." --Albert Einstein
"There is no such thing as a good tax."
"We contend that for a nation to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle."
- Winston Churchill
|