Quote:
Originally Posted by LPete
The cable to the battery and the cable to the starter need to be on opposite terminals of the new relay, not the same terminal. The other red wire that used to be on the starter battery terminal needs to go on the same terminal of the new relay as the battery cable is on.
|
For this to work correctly, everything that was on the big post of the starter originally needs to be on the left post of the remote solinoid, then the big cable to that same origial post on the starter needs to come from the SAME post on the remote solinoid. Essentually making one cable that comes from the battery to the starter, just "tee's" at the remote.
Purple "s" start wire from the harness to the "s" on the remote, then the large cold post of the remote goes to the "s" on the starter.
I just did this a few days ago and it works great.
You know after thinking about it, I guess you could run battery and other red wire to the left side of remote, the original "s" to the remote "s", and a large cable from the cold side of the remote to the big "batt" post of the starter....then a little jumper from the big "batt" post of the starter to the "s" of the starter.
That would also work, either way should make it work.