Quote:
Originally Posted by PaulatFast
Without actually smelling the exhaust, I sure can't tell you what your issue is, but remember a lean condition will cause similar issues. What I can tell you is that cam isn't your problem. As far as your mechanic... I think you have already received enough information to pass appropriate judgement on his Pontiac competance. I would continue to try and diagnose your issue with your current combination.
|
YOU guys have shown me much more competence regarding Pontiacs than he did so he's out.
I'm not going to replace the cam because after Ken Crocie, guy who I bought the cam from, chimed in and said that the cam is not too much for the setup and finding my makeshift washers I installed under the poly locks to try to take up the slack.... that's my first problem to remedy. Find the right poly locks/stud combination.