[QUOTE=rohrt;3974796]
Quote:
Originally Posted by John Haley
I have bent mine a few times over the years, it keeps bending back. It finally broke at the welds. I had to re-weld it and add another bar as a brace to keep it from bending.
QUOTE]
That is surprising that you would need a support. When I had this on the vice it took a good deal of effort to bend.
|
Yours will bend again. They are hardened steel, but they bend at the weld, so bend that rod all you want it will just bend itself more at the weld. I put my brace on about 5 yrs ago and have not had a problem since. I also bought a Lokar gas pedal assembly at the same time and have not had to put it in yet. Brace it or get a Lokar pedal