Yeah, that's what I am going to do. I was asking for the installed height of the valve spring in order to determine if someone put in valves with too short of stems. The stock nuts are hitting the shoulder (when I torque them down) before taking up all of the slack in the valvetrain. I have the correct 9.1XX" pushrods, and the stock 1.5 ratio rockers. That's what confuses me, all the parts are correct; the only thing I can think of is that someone put in the wrong length valves.
I am going to order a set of ARP studs and install them. Thanks for the replies.
Importsmasher
|