Good pics. The vacuum assembly takes very little to hold it in place, and the good rear screw will do most of the work. There's enough lip left to hold the vacuum module in proper vertical alignment, and all I would do is chase the threads and use a little longer screw to get down in the remaining threads to keep the horizontal position steady. I'd use a little blue Loctite on the threads and go easy on tightening the screw down. This is just so non-critical, that I wouldn't be afraid to install it even just using only the rear screw. That end can't go up, it can't go down, and the pin holds it from moving left or right.
__________________
Mick Batson
1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 Catalina Safari Wagon.
|