In '04, I helped someone named Timmie Bowman. This was the last E-mail I received...
Re:
I hope this is not too confusing...
Step 1: Disconnect negative battery cable.
Step 2: Find connector that plug into the gauge cluster. Locate numbers on plastic piece.
Step 3: Wire in position 1 is for seat belt light (don't know color), remove from slot for now.
Step 4: Wire in position 2 (maybe a light green) is to be moved to position 1.
Step 5: Wire in position 3 (maybe a dark blue, 1 or 2 wires together) is to be moved to position 2.
Step 6: Wire removed from position 1 can be placed in position 3 or taped up, so it won't short out.
Step 7: Wire from position 5 (green), remove from slot for now.
Step 8: Wire in position 6 (Dk. Brown) is to moved to position 5.
Step 9: Wire removed from position 5 can be placed in position 6.
Step 10: Reconnect negative battery cable.
Also note that the unit must be grounded if checking to see if it's working before buttoning it all back up.
Let me know if this does or doesn't work.
|