65 wiper motor
After looking further and trying different things I have been able to narrow down the symptoms even more. I have found the problem lies in the bottom screw that grounds the unit to the fire wall. With that screw in, it blows the fuse when the ignition switch is turned on. I have removed that screw and now able to not only plug the motor in without blowing the fuse I can also turn the motor on and off. It does not return to the park position, It will stop where it is when the switch is turned off. It is my understanding that the reason for the bottom screw with the copper ground is that screw grounds the unit and makes the motor rest in the park position when turning off the switch. Any ideas or suggestions to help me further in solving this problem.
|