That will look like H*ll and work like Chit, IMO, John.
Here is why: If you look at Post #107 the bolt hole is centered over the water cross-over water passage.
You put a big washer on the boss on the water cross-over and all it will do is act like a diving board out on the ends unless it is very thick. Either way it will look like a band-aid for a screw-up.
Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|