Also "not a huge deal but if you wanna be anal" make sure the lill ball or anvil is facing up so gravity has no effect on your measurements and measure the bearings 90 degrees from the parting lines meaning straight up and down as this should be where your tightest clearance is fyi
I Want a Gage that measures all 5 mains at the same time to see how straight the mainline is, yes you can use a machinest straight edge and feeler guages but i want a more advanced tool but i also want a hand held sonic tester so i guess i can keep on wishing LOL
__________________
D.S.R.E. Your NW Pontiac Street/Strip Engine Builder, Specializing in Cylinder Head,Intake Manifold,and Exhaust Manifold Porting services and Building the Most Efficient stock rebuilds to Hi HP Pump Gas and Race Combinations for Pontiac,Buicks,Olds,FE Fords,385 Series and HP Gen 3 and 4 LS engines!
2006 silvy Z71 4X4,383 LS 600+hp NA
Shared Toy-66 Lemans 470cid by me 537hp 580tq-manifolds, 570hp 590tq-2"headers,custom cam,rpm intake, mild e-heads, Looks stock ;-}
|