[HWYSTR455]

3 gauge pod = $30, easy to mount, 3 small screws, and it's out of the way, won't get kicked or anything.

I took the gauge pod, put a piece of sandpaper on the lower duct, and sanded the pod to match the curve of the duct. Fits perfect, minimal effort.

The ones in the pic are VDO, mech oil, electric water and volts. These are on the 71 LeMans, same as the 68 for the most part.

Volt = 24 bucks

http://www.summitracing.com/parts/VDO-332103/

Oil = 26 bucks (electric)

http://www.summitracing.com/parts/VDO-350104/

Water = 25 bucks

http://www.summitracing.com/parts/VDO-310105/

Gauge Pod = 30 bucks

http://egauges.com/vdo_indA.asp?PN=POD-004

I wrapped electrical tape around the tach, and it fit right into the right-most dash opening next to the speedo.

.