ahud421,
I wrote this part of the first post simply just for this fact :
I purposly didn't want to mention any of this because of the basic fact that one or two guys would most likely panic & make more out of it than what it really was. So of course it would be best to do after everything was in place. Not to mention there wasn't much time for anything else anyway.
As you can see through your own records 6 months was way over exaggerated. It was nowhere near that & as stated in my 1st post a panic would most likely exaggerate things. This is in no way meant to down play your post Im just showing how easily things can get distorted without the intent to do so.
I gave you an update a long with the other two that had your model headers back on the 9th. You stated in a response a date in Feb to have the headers to you & I am clearly meeting that goal since I told you in the update PM that your sets would be 1st priority after set up. As I documented hear on PY the last issue was the fitting that was damaged. After help from PY members we narrowed it down & it was ordered although through a different carrier. This part is in route.
I started this thread to make sure everyone was up to date on the facts & they are ALL truthful. I obviously didn't post a copy of my unlawful detainer I received for the house I lost or any of the other things that it took to move everything to prove I didn't move because I just felt like it. I sincerely doubt it would prove to some that I have been truthful with this update thread. Once I have everyone caught up & I finally have my own set (for what I have no idea since its all sold for this) then thats it I'll be done & I don't think I will continue after that. Im sure I'll still get bash threads then too maybe for quiting go figure.
The fix on your pattern requires a different bend that I don't have in my pile of bends here that I bent up just before wrapping up the bender for transport. Otherwise I could just do it right now. Rest assured I am working on the bends I do have in the mean while for the headers they will fit. I made sure I got your pattern resolved just before I had to move. Even though the bender was already ready for transport.
|