Yea, I got a reco.
1. Do the rear seat carpet 1st. nail it down with the front HUMP Belt anchors, & Bucket seat rear-fasteners, and Retractable anchors. Rear carpet goes under the rear seat enough so the seat bench gets ALL the carpet's back edge, and the Seat's floor hooks need cut-clear. CUT all rear carpet side-edges for fitment, particularly under the DOOR sill aluminum.
Rear Carpet Reference: the pair of foot-well zones & HUMP-to-Tunnel match.
2A. Position the Front carpet to lay properly (seems to be a continuous effort): Keep a eye on the HUMP forming onto the TUNNEL while getting the front edging to reach under the Plastic Column cover & Firewall pad, while ALSO keeping the toe mat in it's proper location. Helpful to keep curve carpet material "up" behind Front-lower kick-panel contacts.
Front carpet References: Toe pad position & straightness. HUMP-to-TUNNEL match. Then the Front carpet rear beaded edge should be ~3 1/2 " from the Outer Seat retractor covers.
================================================== ===============
I cut edges with a Stanley box-cutter blade.
|