Quote:
Originally Posted by SD421
Wow, cool pic of the work order for the new motor. I read that theres a correct 421 HO in the Goat now? Did you keep the "428"?
Do you know if the cam in the 421 is correct for the year or is it a modern cam?
I think you did a great service to the Goat and to the Pontiac Community for restoring it back to how it would have been the day it was used for the testing in the C&D article.
BTW what size M&H cheater slicks were put on the car? I saw them on another website.
Thanks again for your sharing,
Don
|
428's still handy, yes.
Current cam. Hydraulic. A custom Scott grind.
Thanks! The Milt stuff is pretty cool, for sure (and fun!), and have retained it all. The car had some rust issues - Scott did some killer metal work - and at that point it just seemed to make sense to return it to the way it was when it (and the Blue Car!) made its mark.
Luckily, a lot of stuff was there, so not much of a parts hunt. And kept much of it the way it was (seat still has a small cigarette burn or two!). Still has the 'ol hairline crack in the passenger side taillight, too!
Heads (not SD when it arrived, but w/ 2.02 intakes) and intake are correctly dated, so may be originals. As Tom mentioned, they'd been cleaned up nicely - and out-flowed a set of Ram Air IV heads on Scott's bench.
Really only needed to score a new block (and headliner, carpets, a driver's side quarter and driver's side floor pan!) - and Tom thankfully came through with the original differential (circa '64 4.33's in place - kept those.). 12-bolt/4.56 spool on the shelf, now.
8.00/8.50 - 14 slicks (I think that may be a Keith pic, btw!). 2" Milt headers.