I'm finishing up a build on a 326 at the moment. We had planned to use the Tomahawk 5140 rods, but due to a balance issue we either had to go with mallory metal for the crank or the slightly heavier 4340 H-beams (no brainer there-lol). The owner wanted a lumpy idle, so we're going w/ a Comp cams XE 268- I suspect it will be a bit too lumpy in a 326. We're also running KRE's shaved to 58cc and set up w/ smaller valves to run on a 326- should be interesting to see how well this combo runs.
Geno
|