Quote:
|
Originally Posted by Brent Flynn
Would running a set of the domed TRW floaters in a 400 with a set of 6x's(98cc) milled some to get the compression up to approx 11 to 1 work the same as long as deck height is zero, or does it matter as much since there are domes on the pistons?
|
You would still hafta mill the $#!t outta those 6X-8 heads to get those to a chamber size that'll net close to 11.0:1 CR with the TRW/FM L2279F dome pistons.
It would take something like some 6x-4's milled to like 85cc's on a zero deck shortblock to get close to 11.0:1 CR with those pistons (that's like 10.94:1 CR).
The dome on those pistons is pretty dang small,only like +10cc's compared to the flat tops that are -6.6cc's or so.
FWIW/HTH
Bret P.
__________________
This space for rent...
In the meantime,check out the cars
HERE.
