Get an Ariadni. They are in red and white boxes. They have the slide beside the toggle switch and are not the rotary type. I used them for many years & never had a customer complain or replaced a failed one. Put them in my house when I built. Never an issue. I have some that have near 800W on them. You have to size them to the correct amount of wattage you have in bulbs on the load. They make different load ratings. Read the instructions and don't break off any more tabs than you have to or at all. This may require positioning them differently in the switch box if you have a multi-gang situation. Putting on the end gives more room for the Alum. tabs.
What happens is people don't realize that they are rated for different wattages or remove too much of the heat sink when they install them.
__________________
"If you do everything you'll win"
-LBJ
13 Smiles per Gallon:
66 Bonneville wagon
66 Bonneville 2d HT - In perpetual progress
2005 GMC L-33
|