Quote:
Originally Posted by paint guy
First off, if motor runs but will not shut off, you probably have a ground issue. The motor itself should have a brass ground strap, in addition to the ground strap on the switch . The main power is black/yellow tracer and goes to the middle of the 3 prong terminal. This also jumpers over to the nearest terminal on the washer (2-prong) The other wire to this 2-prong is blue/white.The other wire that goes to the motor in the double prong is black/green, and to the single prong is blue.
|
Thanks..great description. I hooked up just like you stated. I do have the ground strap.
Been working on it this morning. Appart from the washer pump not working, it just does not want to turn off. When I hit the off it reverses itself, like to park the wipers and clicks once and then just keeps repeating the cycle and continues to run. I am thinking that perhaps I burnt out resistor or something.
Electrical debug is not my strong suit. Appreciate any other insight and will keep pluging away at it.