Thread: Mr. Carburator Plumber Needed
View Single Post
  #2  
Old 04-10-2011, 10:41 PM
PunchT37's Avatar
PunchT37 PunchT37 is offline
Ultimate Warrior
  
Join Date: Dec 2002
Location: Lafayette,LA
Posts: 3,349
Default
Also remember, as Tom stated, NPT threads are tapered. So, don`t go hog wild on tightening as the fitting gets "bigger" the more you tighten. You can split the bore if you are careless.

Reply With QuoteReply With Quote