Quote:
Originally Posted by JKGTO
You cant raise the bottom ram air pan as the air filter lid will hit the upper ram air pan. Even using a slightly taller air filter can do that. Your either going to have to modify the upper ram air pan or the carb pan. You already had to drill a hole in the carb pan for the vent? Jim
|
I haven't done anything to it yet. If I drill the lower pan for the vent then it's going to let in unfiltered air because the hole would be inside the circumference of the filter element. I was wanting to avoid modifying the pan because I didn't want to disturb that nice rounded contour that guides air into the carb, but it looks like that's what I'm going to have to do. I'm going to have to create some sort of dimple or shape on the lower pan that's tall enough to clear the
carb vent.
Thanks for the response - it's exactly what I needed to know.
Rob