The bracket that slips over the rear end bushing is offset to the driver's side. Before you all demand the name of the vendor, I would like to point out that this control arm is the only one on the market that is built CORRECTLY. You see, the stock control arms are built with exactly the same offset as these control arms. Every other manufacturer, that I have seen, makes upper rear control arms so that the front and rear bushings are inline. This is INCORRECT! This also explains why the rear end in my car is offset to the passenger side by a good 1/2-3/4" as measured from the wheel to the frame. I have seen posts on various forums where people have complained about a similar problem. I also believe that this improper positioning of the rear end has been contributing the ever present vibration problem that I have been having.
I would like to thank Bret Voelkel and RideTech for making a fine product and paying attention to the little details that can have a big impact on the performance of our cars.
Andrew
__________________
IG: projectgattago
Please get in touch for Holley EFI tuning services.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets."
|