Quote:
Originally Posted by mkeafer
Gentlemen:
I am finally getting around to changing out the master cylinder on my 1964 Catalina with power drum brakes. I went to my local brake and clutch excahnge and they fixed my up with a dual master cylinder from a 1967 Chevrolet Biscayne. It fits just fine but they is absolutely no room near the fender for the tubing to come out. I have been looking at the pictures from mkoser and there seems to be plenty of room for his installation. He did use a different master cylinder but I can't see from the picture that there were be any difference in the size of the body of the master cylinder. I am totally confused now. His post says his car is a 1964 also, but I don't have the room he does. What am i missing? Help!!!!
Thanks in advance.
Mike.
|
Yeah, Mine was really tight. I bent all the tubing by hand (need to re-do it, it looks bad). I bent a "90" on the one fitting, just to get it in there. I didn't kink it, so it seems good to go.
Hopefully I'll detail under the hood this year.
Thanks,
MK