Quote:
Originally Posted by 62 bv
i got mine from steel rubber products once you get out of the car you have to drill out some rivets out to get it apart
|
I'm not sure what Year car Fat Cat is talking about but if it's a '65 or '66, you don't need to drill any rivets out that I'm aware of.
First job is pulling the entire quater vent assembly out of the door. It's actually quite easy to do and if you mark the settings carefully, it will go back into the same position without difficulty.
You pull out the felt chanel and there are screws behind which simply undo. The window will pull out and it all becomes quite clear on how they are assembled.
Good Luck
Ian
