[Conundrum]

Wow, i've done some work since i've been on here last....

OK, I removed the front clip to Z the frame....



I then cut the frame off....



And then started to reassembly, I moved the frame up 2" and forward 1"....




I then removed the stock front suspension to install my sectioned crossmember and drop spindles, figured while I was at it I would go ahead and chop 1" off the coils for a total of 8" of drop....




Through one of my good fenders on to see where I was at with no weight on the front end....


Then I got the engine just sitting in there, and took another pic of the stance....



I do have the rear dropped now, but I have to find some U-bolts that are the right length and i'm going to be swapping the rear axle soon so i'll wait to share any pics or details on that. I did see that I have some work to do to my motor mounts to get them to work.