Correct Trunk lid for 01D '69 Judge?
May sound like a silly question, but... What trunk lid type(s) would be correct for an early Judge built 4th week of Jan ’69 (01D) at the Fremont, CA plant?
I have three trunk lids here and have noticed that there are three different inner layer configurations as seen in the attached pics. Did the factory have to drill/cut the spoiler holes in the inner bracing for any of the early cars. This question has come up because the lid in the first pic is extremely straight and rust free while the other two are junk.
One more question… Did all ’69 GTOs/Judges come with the stainless trim at the bottom edge of the trunk lid? I ask because the fastening tabs on the trim would have to be bent/flattened to be flush with the inner structure of the lid in the first pic while it fits perfectly on the lids in the other two pics.
Any words of wisdom out there would be appreciated.
Thanks.
Rob
|