62eyadams after I removed the anodizing, I cleaned, grease and wax remover, cleaned again. I then sat down with pinstrip tape and out lined the whole section Then I used progressivly larger tape. Then paper to cover the lage areas. You will need a razor knife to trim. I used eastwood trim paint. It didn't work. Had to clean and retape. Good plastic coat paint black satin. I did one half at a time. Took A long time. When I would get frustrated I set it a side and then went back to it. I only did one side at a time. It has held for two years now. Turned out great. I then polished the grill with Mothers aluim. polish. Then wax. I polish it once a year. Winter project. John
|