That's alot of pressure shows you have tight bearing clearances. One point to consider is keeping oil to the pump. Hopefully you have a larger than stock capacity oil pan? My fear is pumping to much oil up and not getting enough to drop to the pan fast enough. Also, only run high quality oil filters to avoid ballooning or rupture. I'd like to see the pressure in the 60-70# range but even a cold 80# would help some. I hate you will have to pull the pan to correct the pressure. Good Luck and enjoy. JD
__________________
Good luck to the new owner of the Ventura II! Sold the car after 13+ years. Look for it on the Hot Rod Power Tour in the future as it's currently being re-configured as a Pro-Touring ride! 
|